TDK has introduced an ultra-compact TVS diode for ESD protection applications with USB-C ports and other high-speed ports. TVS diodes with ultra-low parasitic capacitance and low clamp voltage are especially needed for ESD protection applications with high-speed interfaces (Tx/Rx) such as USB-C that comply with the USB4 (Version 1) specification and transfer speeds up to 40 Gbit/s.
TDK Corporation has further expanded its Flexield shielding material lineup with the introduction of the IFQ06 series, a material with high permeability (μ ') and low magnetic loss (μ ") designed for near-field communication (NFC) applications. The IFQ06 material also provides efficient protection against performance-reducing design features that complicate the NFC design, such as metal objects located directly behind the antenna.
TDK has expanded its Micronas embedded motor controller product portfolio and launched the first members of the new HVC 5x series programmable SoC motor controllers for driving small stepper, BDC, and BLDC motors in automotive and industrial applications. The new series provides a specific application evolution of popular HVC 4x devices, which plan to provide "one IC fits all" motor control solutions for stepper, BLDC, and BDC motors.
TDK Corporation has developed a range of inductors based on industrial Single Pair Ethernet (SPE) 10 BASE-T1L applications of the IEEE 802.3cg standard. Suppression of asymmetric interference is critical to achieving interfertion-free data communication, and the new RCM70CGI-471 common-mode choke, with an inductance value of 470µH, rated voltage of 80 V, and rated current of 700 mA, is ideal for this type of application
TDK has introduced the Micronas Fast 2D Hall Effect position sensor family HAL 302X to meet the demand for position detection against stray field motors in automotive and industrial applications and for development in compliance with ISO/26262 standards. This new sensor family initially contains two members, HAL 3020 and HAL 3021, with differential and unipolar chord and cosine analog outputs for standard Angle calculations with external microcontrollers/ECUs.
TDK Corporation further expanded the embedded motor controller product portfolio of its subsidiary Micronas with the introduction of the new HVC 5x family of programmable System on Chip (SOC) motor controller products for powering small stepping, brushed (BDC) and brushless (BLDC) DC motors in automotive and industrial applications.
TDK introduced the ModCap HF modular high-frequency power capacitor with modular design concept for DC support applications. The new B25647A * series components not only have ultra-high switching frequency, but also provide six newly developed models, covering the rated voltage of 900 V to 1600 V, the capacitance range of 640 µ F to 1850 µ F, the rated current range of 160 A to 210 A (depending on the model), and the maximum allowable hot spot temperature of 90 ° C.
TDK has developed a new TFM-BLE series thin film power supply circuit inductor. TDK integrates the film technology developed in the magnetic head business into the manufacturing of this series of inductors, and uses TDK's characteristic conductor forming technology to use magnetic metal materials with high saturation magnetic flux density as core materials, so as to meet the DC bias characteristics required by inductors in power circuits, and optimizes space constrained applications such as smart phone power circuits
TDK announced the expansion of its SmartAutomotive Safety Integrity Rating (ASIL) and non-ASIL Motion Sensor product line. InvenSense IAM-20380HT monolithic integrated MEMS and ASIC triaxial MotionTracking sensor platform solutions for non-safety automotive applications, including IAM-20380HT triaxial MEMS gyroscope and DK-20380HT development suite
The ICM-20648 is a six-axis motion tracking device ideal for smartphones, tablets, wearable sensors, and general Internet of Things applications.
TDK InvenSense T5837 and T5838 Bottom Port Microphones are multi-node low-noise digital microphones offered in a small package. These microphones comprise of a MEMS microphone element and an impedance converter amplifier followed with a fifth order Σ-Δ modulator.
TDK has introduced the more compact EPCOS B72307S0* (StandarD S07 Compact series) and B72310S0* (StandarD S10 Compact Series) series lead sheet varistors,the optimized compact design and excellent electrical characteristics make the StandarD S07 Compact series and the StandarD S10 compact Series suitable for a wide range of applications such as LED lighting, switching power supplies and home appliances such as microwave ovens and refrigerators, while saving space on the board.
The RFE2500 AC/DC industrial power supply has high efficiency and is 1U high. They have internal ORing mosfet and current sharing for parallel operation. The optional isolated PMBus (I2C) interface can be used to communicate with the power supply. AC fault, DC normal, range output regulation, remote on/off and 12V auxiliary output as standard configuration.
TDK InvenSense's SmartBug (MD-42688-P) is a multi-sensor wireless module that utilizes TDK MEMS sensors and algorithms for a wide range of iot applications.This module combines six sensors, a powerful wireless (BLE) MCU, seven algorithm-driven features, and a rechargeable battery all in a small ladybug case. It also offers an add-on board option that includes a Wi-Fi module, an SD card slot, and a TDK ultrasonic sensor
TDK has introduced B3271*H* series of new EPCOS film capacitors. Suitable for high energy and power density DC support applications, the new series of components are rated for voltages ranging from 500 V DC to 1600 V DC, capacitance values ranging from 0.47 µF to 170 µF and maximum operating temperatures up to 105 °C. These components are rugged, self-healing, RoHS compliant and have a typical life of 95,000 hours at rated voltage and operating temperature of 70 °C.
TDK has introduced the new EPCOS B78302A* series miniature transformers, ideal for ultrasonic applications. The new series of transformers, with E5 core and SMD (surface mount) designs, are available in three models with turns ranging from 1:1:10.8 to 1:1:15.3 and inductances ranging from 2 mH to 4 mH, which can be adjusted to the customer's customized requirements.
TDK provides high current and low DC resistance power supply inductors for automotive power circuits. Inductors for automotive power circuits have a high magnetic shielding structure for high-density installation, support operating temperatures from -40 to +150 ° C (including self-heating) and comply with AEC-Q200 and RoHS standards
TDK has introduced a new VLS5030EX-D inductor (5.3 x 5.0 x 3.0 mm (L x W x H)) as part of the VLS-EX-D series of wire-wound ferrite power inductors for automotive power circuits. These small components have excellent DC stacking characteristics and can maintain performance even at operating temperatures up to 150 ° C. The inductors are suitable for headlights, airbags, electric power steering (EPS), advanced driver assistance systems (ADAS), engine control units (ECU), and a variety of other power circuit applications
