Toshiba Electronics components and storage Devices Co., Ltd. launched 150V N channel power MOSFET-- "TPH9R00CQ5", which uses the latest generation of U-MOSX-H process, can be used for industrial equipment switching power supply, including data center and communication base stations and other power applications.
Diodes bring out the AP7387Q low voltage difference (LDO) voltage regulator. The device provides a maximum output current of 150mA, with a wide input voltage ranging from 5V to 60V, and a voltage difference of 700mV (typical value) at 100mA output current. The device provides engineering teams with an easy-to-implement point-of-load (PoL) solution for automotive audio, navigation, taillight, transmission control units, and battery management systems.
Rohde & Schwartz demonstrated the new EPL1000 EMI measuring receiver at EMV 2023 Stuttgart for reliable authentication measurements while greatly reducing test time. The EPL1000 is a compact, complete and CISPR 16-1-1 compliant measurement receiver for fast and accurate measurement of EMI up to 30MHz. The built-in spectrum analyzer and tracking signal generator capabilities make the R&S EPL1000 ideal for a variety of laboratory applications
In some applications in industrial, consumer and automotive fields, the requirements for operational reliability are increasingly high, especially in some applications with more demanding environmental requirements, which need to be able to withstand adverse factors such as low temperature, moisture, dust and debris. The traditional mechanical switch is not only limited in design and assembly, but also difficult to meet the reliability requirements. The non-contact all-pole Hall switch is an ideal alternative
AD-SYNCHRONA14-EBZ is a standalone device that is ideal for evaluation and prototyping applications that require high precision frequency and phase control source clocks. Based on AD9545 and HMC7044, the device greatly simplifies clock allocation and multi-channel synchronization in complex systems
The development of safety systems is critical to the automotive market. The Rust programming language can be used for embedded development of memory-safe software, an important enabler of mission-critical automotive software design. Infineon Technologies AG has taken the first step toward building the Rust ecosystem in the embedded space by becoming the first head semiconductor manufacturer to officially support running the Rust language on microcontrollers
STMicroelectronics' new STM32 Bluetooth wireless module enables designers to leverage the advantages of the STM32WB dual-core microcontroller (MCU) in wireless products, especially in low and medium volume projects.
Infineon Technologies has announced the introduction of the new iMOTION™ IMI110 series of intelligent Power modules (IPMs). The product family integrates an iMOTION motion control engine (MCE), A three-phase grid driver, and A 600 V/2 A or 600 V/4 A IGBT in a compact DSO-22 package
AMS further meets customer needs with the introduction of the OSLON UV 3535 series of power UV-C leds that offer longer service life, greater power output and easier system integration,With its compact design, leading efficiency, and superior quality, OSLON UV 3535 leds are ideal for consumer and industrial applications such as water purification, air conditioning system kill.
Power Integrations announced the launch of 900V gallium nitride (GaN) devices, adding to the InnoSwitch3 series flyback switch IC. Using the company's proprietary PowiGaN technology, the new IC delivers up to 100W of power with an efficiency of over 93%, eliminating the need for heat fins and simplifying power design for space-constrained applications. The InnoSwitch3 design also features excellent light-load efficiency, making it ideal for providing auxiliary power to electric vehicles in low-power sleep mode
TDK Corporation has developed a range of inductors based on industrial Single Pair Ethernet (SPE) 10 BASE-T1L applications of the IEEE 802.3cg standard. Suppression of asymmetric interference is critical to achieving interfertion-free data communication, and the new RCM70CGI-471 common-mode choke, with an inductance value of 470µH, rated voltage of 80 V, and rated current of 700 mA, is ideal for this type of application
Bourns introduces AD and SD series miniature thermal fuse (TCO) miniature circuit breaker assemblies. The Bourns AD and SD series mini circuit breakers offer several industry-first features including: a high level of reset, precision and repeatable overtemperature protection not previously available in miniature devices.
Onsemi announced the launch of an innovative image sensor - AR0822. The embedded High Dynamic Range (eHDRTM) function and optimized Near Infrared (NIR) response of this device are crucial for applications with harsh lighting conditions, such as security monitoring, portable cameras, doorbell cameras, and robots. The low-power architecture and motion wake-up function of this sensor aim to significantly reduce system power consumption.
The Infineon Smart high Side Switch PROFET series provides protection for different types of loads. For example, when the voltage on a capacitive load is higher than the battery voltage, the problem of battery reverse polarity is similar. The smart high side switch will report an error and turn on the MOSFET, allowing the current to flow through the channel, thereby reducing the overall heat output of the chip
STMicroelectronics has introduced ultra-compact low-power Internet of Things module ST87M01, which integrates highly reliable and robust NB-IoT data communication with precise and flexible GNSS geographical positioning functions. It is an ideal device for designing Internet of Things and asset tracking devices. The fully programmable, industrial-grade module is LTE Cat NB2 NB-IoT certified to cover the global cellular mobile network communications spectrum and integrates advanced security features.
STMicroelectronics introduced the new STM32U5 chip, which improves performance while reducing power consumption, and extends battery life and improves energy efficiency. STM32U5 has obtained NIST embedded random number entropy source certification, which is the first universal MCU in the industry.
Sensirion has successfully developed a new high velocity measurement sensor, the SLF3S-4000B, with an innovative design that can measure fluid velocities up to 1 L/min, extending thermal flow measurement to laboratory analysis and industry. With this highly cost-effective liquid flow sensor, Sensirion fills a gap in the market for high velocity flow measurement sensors in laboratory analysis and industry. It is capable of accurately measuring velocities up to 1 L/min with Sensirion's usual high quality, and is only 5 cm long and weighs only 7 grams.
Nexperia announced the introduction of 650 V Silicon Carbide (SiC) Schottky diodes for power applications requiring ultra-high performance, low loss and high power efficiency. The 10 A, 650 V SiC Schottky diodes meet industrial grade device standards and address the challenges posed by high voltage and high current applications, including switching mode power supplies, AC-DC and DC-DC converters, battery charging infrastructure, uninterruptible power supplies and photovoltaic inverters, and improve continuous operation performance
