The ADXL345 is a small, thin, low-power three-axis accelerometer that provides high-resolution (13-bit) measurements of acceleration up to ±16g. The digital output data is in 16-bit twos complement format and can be or 4-wire) or I2C digital interface access.
The Allegro MicroSystems A89506 full-bridge PWM gate driver is optimized for PWM control of DC motors. The device is capable of operating at 50V and can provide gate drive for all n-channel external MOSFET bridges. The device includes input terminals for controlling the speed and direction of the DC motor using an externally applied PWM control signal. The internal synchronous rectification control circuit reduces power consumption through PWM operation.
Laird Connectivity's Summit SOM 8M Plus development kit enables engineers to develop with Laird Connectivity's Summit Modular System (SOM) 8M Plus, a highly integrated software and hardware solution, It is supported by a high performance NXP Semiconductors i.M 8M Plus processor. The Summit SOM 8M Plus development suite supports the development of advanced wireless Internet of Things (IoT) applications, including industrial IoT devices for harsh environments, IoT vision solutions, and medical devices.
Cree LED Colour LEDs offer a wide range of spectral options for general and speciality lighting applications. These LEDs provide a small package size, low power consumption and are application-optimised to facilitate the lowest system cost. The LEDs are easy-to-choose, simple to use, and created to provide beautiful, long-lasting, energy-efficient light.
Diodes Incorporated offer a series of bidirectional current monitors based on a high-stability zero-drift architecture. These devices can accurately measure very low sense voltages over a wide range of common-mode voltages. Key applications include servers, power supply racks in server farms, laptop PCs, battery chargers, industrial servos, and robotic systems.
Sensata Technologies has created a new fly-by-wire inceptor for electric vertical take-off and landing (eVTOL) aircraft and has supplied prototypes to several advanced air mobility manufacturers.
Analog Devices ADPD6000 multi-modal sensor front end, is highly integrated, designed to measure a variety of important signals. AFE optical channels are created as optical modules that stimulate up to 4 LEDs and measure the return signal at 4 independent current inputs. The signal chain rejects signal skew and corruption from asynchronous modulation interference, typically from ambient light, eliminating the need for optical filters or externally controlled DC cancellation circuits.
Infineon Technologies AG has introduced highly efficient and reliable step-down DC-DC converter modules. Adding to the PoL family, these modules are ideal for system designers looking for compact, fully integrated, and simple-to-design POL products to assist them in speeding time to market. They primarily address space and thermally constrained telecom and datacom applications, servers, and network storage.
TDK Corporation has expanded its TMR angle sensor portfolio with the release of the TAS4240 TMR-based angle-sensor for automotive and industrial applications. The device is supplied in a compact TSSOP8 package and offers two redundant analog single-ended SIN/COS outputs. The sensor provides precise angle measurements in applications where high performance is required and space is limited.
Texas Instruments AMC22C11-Q1 Automotive Grade Isolated Comparator is a short response time isolated comparator. The open-drain output is separated from the input circuit by an isolation barrier. The isolation barrier is highly resistant to magnetic field disturbances. It is certified to provide galvanic isolation up to 3kVRMS according to DIN EN IEC 60747-17 (VDE 0884-17) and UL1577. It supports operating voltages up to 560VRMS.
Vishay Intertechnology, Inc. has announced the availability of three small form-factor devices -- IHP-0603, 0805 and 0806 -- IHP-0603zh-01, IHP-0805zh-01 and IHP-0806zh-01. Expand its IHHP series of ultra-thin, high-current power inductors. Vishay Dale IHP-0603zh-01, IHP-0805zh-01, and IHP-0806zh-01 feature low DCR, low core loss, and a maximum height of only 0.8 mm for use in Internet of Things (IoT) devices and portable electronics, saving space and increasing efficiency.
Texas Instruments ISOUSB111DWXEVM Evaluation Module (EVM) is used to evaluate a high-performance 5000VRMS reinforced isolated USB repeater in a 16-pin SSOP (DWZ-16) package. The evaluation module has test point and jumper options to support evaluation with minimal external components.
BYD Semiconductor announced the launch of an industrial-grade global shutter CMOS image sensor chip - BF3031. BF3031 is a 1/3-inch 500,000-pixel image sensor chip developed and produced by BYD Semiconductor using Global shutter technology. It supports parallel and MIPI digital output interfaces. The effective pixel array is 838×640, and the maximum frame rate is 120fps@full.
Würth Elektronik offers another high-quality switch from the series of washable tact switches. The WS-TASV Tact Switch for SMT assembly is extremely space-saving, with a footprint of only 4.1mm x 2.8mm and a height of 1.9mm. Three variants are available, colour-coded according to their actuating force: 200g (black), 300g (white), and 400g (salmon). The tact switches are developed for an operating temperature range of -55C to +125C.
Infineon Technologies AG and Delta Electronics have developed a three-in-one system that combines solar, energy storage and EV charging. Thanks to bidirectional inverters, the electric car is not only charged but can also be utilised as a buffer storage or as household emergency backup power. More and more cars are equipped for this. Bidirectional energy flows could also be employed to realise new vehicle-to-home (V2H) and vehicle-to-grid (V2G) solutions.
Texas Instruments offers high immunity, 5.7 kV reinforced single and triple channel digital isolators, ISO7830/31/10/10F are high performance single and triple channel digital isolators with 8000 V (PK) isolation voltage. These devices have enhanced isolation certification according to VDE, CSA and CQC. Isolators provide high electromagnetic immunity and low power consumption with low emissions while isolating CMOS or LVCMOS digital I/Os.
Broadcom's automotive high-precision r2 coupler isolation products provide enhanced isolation and reliability, Broadcom's ACPL-C87AT and ACPL-C87BT automotive isolation amplifiers utilize superior optical coupling technology, Sigma-delta (Sigma-Delta erta) analog-to-digital converters, chopper-stabilized amplifiers, and fully differential circuit topologies to provide unmatched isolation-mode noise rejection, low offset, high gain accuracy, and stability.
Texas Instruments provides SAR adc internal reference buffer, internal LDO, and multi-spi digital interface, DS8920B, ADS8922B and ADS8924B (ADS892xB) are pin-to-pin compatible, high-speed, high-precision successive approximation register (SAR) based ADCs family with integrated reference buffer and integrated low dropout regulator (LDO).
