Rohde & Schwarz and VIAVI Solutions, Inc. have announced support for Auray OTIC and Security Lab in the process of awarding O-RAN conformance certification for international markets. The certification of an O-RU of the RPQN series from Foxconn was conducted according to O-RAN specified processes and procedures as defined by the O-RAN ALLIANCE.
ROHM, the world's leading semiconductor manufacturer, is targeting on-board camera modules that are increasingly used in products such as ADAS (Advanced Driver Assistance Systems). The new product is able to meet stringent functional safety requirements, making it easier to design the safety required for the next generation of ADAS-equipped vehicles.
Rohde & Schwarz has released a comprehensive set of coordinated software options for its vector signal generators and signal and spectrum analysers.
To assist EMC engineers in meeting the growing demand for higher measurement speeds, Rohde & Schwarz introduces a unique wideband solution that can measure up to 970MHz in real-time while maintaining a high dynamic range and measurement accuracy. With this new extension, the R&S ESW EMI test receiver features the largest bandwidth in the industry and becomes the fastest EMI test receiver on the market.
ROHM(headquartered in Tokyo, Japan), a world-renowned semiconductor manufacturer, has developed the reset IC*1(voltage detector) "BD48HW0G-C" with high precision and ultra-low static current for a variety of vehicle-mounted and industrial equipment applications that require voltage monitoring of electronic circuits to ensure safety, including vehicle engine control units and FA devices.
The 4th generation SiC MOSFET new product adopted by SEMIKRON not only has a longer short-circuit withstand time than previous products, but also achieves the industry's ultra-low on-resistance. It will be very helpful to install it in the vehicle host inverter. Electric vehicles extend range and reduce battery size.
ROHM has developed the fourth-generation fast recovery diode "RFL/RFS series" that realizes low loss performance and ultra-low noise characteristics, contributing to improving power efficiency of air conditioners, electric vehicle charging points, etc. and contributing to noise reduction measures
Rohde & Schwarz announces two additional maximum frequency options for its SMW200A vector signal generator, 56 GHz and 67 GHz. The company believes that the SMW200A is the first to achieve a flat frequency response and 2 GHz modulation bandwidth above 44 GHz.
ROHM Semiconductor Europe has introduced new power semiconductor solutions for e-mobility and energy conversion applications. One of its new power innovations is its 4th generation of SiC MOSFETs. It attains up to 50% lower switching loss and 40% reduction of ON resistance with no sacrifice to short-circuit ruggedness. The latest generation provides a more flexible gate voltage range (15-18V) and supports turn-off with zero volt – allowing simple gate drive circuits with unipolar supply to be employed.
ROHM has added seven new devices, the R60xxVNx family, which is optimized for power supply circuits for industrial equipment requiring high power. The new series uses the latest proprietary process, while two lower ON resistance models have been added to the R60xxYNx series standard low ON resistance 600V superjunction MOSFEts
Rohde & Schwarz R&S FSW equipment provides extensive internal analysis bandwidth capable of characterizing broadband components and communication systems, and also establishes its position at the forefront of 5G NR testing with the new R&S FSW-B24U enhanced dynamic front-end upgrade, The company addresses the challenging demand for EVM performance across the mmWave spectrum. The new R&S FSW43, R&S FSW50 and R&S FSW67 models now arrive with standard enhancements.
Rohde & Schwarz offers two new options for the R&S ZNrun Vector Network Analyzer automation suite. The R&S ZnRun-K410 is designed to automatically test cable assemblies by and CD according to IEEE 802.3BJ, saving users a lot of time. The test setup is based on the corresponding vector network analyzer, such as R&S ZNA or R&S ZNB. To reduce user processing, the R&S OSP Open Switch and control platform supports an economical multi-port solution.
The ROHMs 150V GaN HEMTs, GNE10xxTB series (GNE1040TB) increases gate withstand voltage (rated gate source voltage) to an industry-leading 8V -- ideal for power circuits in industrial equipment, including base stations and data centers with Iot communication equipment. These new products adopt the existing construction and increase the rated gate source voltage from the traditional 6V to 8V.
ROHM Semiconductor corporation has announced that Lucid is using its SiC MOSFET in the breakthrough Lucid Air. The enhanced performance of ROHM's SCT3040K and SCT3080K SiC MOSFEts at high frequencies and high temperatures helps Lucid reduce design size and reduce power losses for high charging efficiency. Lucid Air was named car Trend of the Year 2022. An independent article by Insideev confirms its ability to charge.
ROHM has developed the D/A conversion IC (DAC chip)BD34352EKV and the corresponding evaluation board BD34352EKV-EVK-001. The audio DAC chip is designed to maximize the extraction of high-resolution digital audio data and convert it into analog audio signals, which is one of the most important components in defining the quality of audio equipment. The new DAC chip, BD34352EKV, has been specifically tuned to express the energy of the sound source, while maintaining the naturally flat sound characteristics of its DAC chip design concept.
Rohde & Schwarz offers high-performance 5G automotive measurement, including comprehensive test coverage including RF, protocol and application testing, using its new R&S CMX500 single-box tester that covers the full development cycle of the vehicle from chipset to TCUs and throughout. Providing extensive testing capabilities to support all 5G NR deployments, the company's GNSS simulator generates signals for all operational satellite navigation systems, including GPS, GLONASS, Galileo, Beidou, SBAS and QZSS in L1, L2 and L5 bands.
Rohde & Schwarz works with Realtek to comply with current and future open Alliance standards. The development of DAS and enhanced infotainment applications requires the development of on-board communications to support the higher data rates required. Product validation must take place before a new product is put on the market. Rohde & Schwarz's high performance test instruments and fixtures provide the performance required to verify compliance with standards.
ROHM recently added a new thermal analysis feature to its ROHM Solution emulator, which runs on the company's website and is free for all kinds of simulations -- from component selection to device-specific and even system-level validation. The newly added thermal analysis capability can be used to solve circuits in devices and applications where heat can become a problem in electronic circuit design.
