The AD6645 is a high-speed, high-performance, monolithic 14-bit analog-to-digital converter (ADC). The chip contains all the necessary features, including Trace and Hold (T/H) and reference, to provide a complete conversion solution. Units are available in 52 Lead Exposure Pads (TQFP_EP) packaging with specified ranges −40°C to +85°C, at 80 MSPS and −10°C to +85°C, at 105 MSPS.
The DAC8043A is an improved high-precision 12-bit multiplicative digital-to-analog converter in a PDIP package and a 1.75 mm height SOIC-8 surface-mount package with a space-saving 8-lead package. Suitable for extended industrial temperature range (-40°C to +85°C). And with serial input, dual buffering and excellent analog performance, it is ideal for PC board space is very important applications.
The AD1674 is a complete multipurpose 12-bit ADC consisting of a user transparent onboard sampling-hold amplifier (SHA), a 10-volt reference, a clock, and a three-state output buffer for microprocessor interfaces.
The ADUC816 is a complete smart sensor front end that integrates two high-resolution sigma-delta ADCs, an 8-bit MCU and program/data Flash/EE memory on a single chip. ADUC816 is packaged in a 52-pin MQFP package. The unit operates from a single 3v or 5v power supply. The unit consumes less than 10mw when using a 3v power supply and is packaged with 52-pin MQFP and 56-pin LFCSP.
The AD7892 is a high-speed, low-power, 12-bit a/D converter powered by a single+5V power supply. The device contains a 1.47 µ s successive approximation ADC, an on-chip tracking/holding amplifier, an internal+2.5 V reference, and an on-chip general-purpose interface architecture that allows serial and parallel connections to microprocessors.
The AD8226 is a low-cost, wide-range instrument amplifier that requires only one external resistor to set the gain between 1 and 1000. It is designed for various signal voltages. Using an 8-pin MSOP and SOIC package, it is fully suitable for operation from − 40 ° C to+125 ° C. Ideal for industrial applications with multiple channels and limited space.
The HMC1190ALP6NE is a high linearity broadband dual channel down conversion mixer that integrates a phase locked loop and a voltage controlled oscillator, optimized for multi standard receiver applications that require a compact, low-power design. A compact 6x6mm lead-free QFN package that meets RoHS standards is used. The integrated broadband limited LO amplifier enables the HMC1190ALP6NE to achieve unprecedented RF bandwidth of 700 MHz to 3800 MHz, suitable for applications such as cellular/3G, LTE/WiMAX/4G, and more.
The AD8018 is suitable for single power (5 V) xDSL modems, where high output current and low distortion are necessary to achieve maximum transmission range. Dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power rail. Each amplifier can drive a 400 mA current to 10 Ω (differential) while maintaining an - 82 dBc out of band SFDR.
The LTC3122 is a synchronous boost DC/DC converter with true output disconnection and inrush current limitation. The 2.5A current limit and the ability to program output voltages up to 15V make the LTC3122 ideal for a variety of demanding applications. The LTC3122 is offered in a low-spec 12-lead (3mm x 4mm x 0.75mm) DFN package and a 12-lead thermal enhanced MSOP package
The HMC197BE is a low-cost SPDT switch in a 6-pin SOT26 plastic package for general switching applications requiring very low insertion loss and a very small size. The device can control signals from DC to 3 GHz, especially for 900 MHz, 1.8-2.2 GHz, and 2.4 GHz ISM applications with losses of less than 1 dB.
The AD8553 is a precision instrumentation amplifier featuring low noise, rail-to-rail output and a power-saving shutdown mode. The AD8553 also features low offset voltage and drift coupled with high common-mode rejection. In shutdown mode, the total supply current is reduced to less than 4 μA. The AD8553 is capable of operating from 1.8 V to 5.5 V.
The AD652 synchronous voltage-frequency converter (SVFC) is a powerful component of precision analog-to-digital conversion, providing a typical nonlinearity of 0.002% (Max. 0.005%) at 100 kHz output frequency. The inherent monotonicity of the transfer function and the wide clock frequency range allow conversion time and resolution to be optimized for specific applications. The AD652 is available in five performance grades and operates in an extended temperature range from −55°C to +125°C
The AD2S80A is a single piece 10 -, 12 -, 14 -, or 16-bit tracking parser-digital converter included in a 40 - pin DIP or 44 - terminal LCC ceramic package. The working reference frequency ranges from 50hz to 20000hz. It is manufactured using the BiMOS II process, combining the benefits of CMOS logic and dual ultra-precision linear circuits on the same chip.
HMC1190ALP6NE is a high-linearity broadband dual-channel down-conversion mixer, which integrates phase-locked loop and voltage-controlled oscillator, and is optimized for multi-standard receiver applications requiring compact and low-power design. The compact 6x6mm lead-free QFN package conforming to RoHS standard is adopted. The integrated broadband limited LO amplifier enables the mixer to achieve unprecedented RF bandwidth of 700 MHz to 3800 MHz, which is suitable for cellular/3G, LTE/WiMAX/4G and other applications.
The MAX6690 is an accurate digital thermometer that reports the temperature of the remote P-N junction and its own mold. Using a small 16-pin QSOP surface-mount package, the remote junction can be a diode-connected transistor -- usually a low cost, easy to install 2N3904 NPN type or 2N3906 PNP type -- in place of a traditional thermistor or thermocouple. The default low temperature measurement limit is 0 ° C. This can be extended to -64°C by setting bit 5 of the configuration register to 1.
The LT6654 is a family of small precision voltage references that offers high accuracy, low noise, low drift, low dropout and low power. The LT6654 operates from voltages up to 36V and is fully specified from –55°C to 125°C. A buffered output ensures ±10mA of output drive with low output impedance and precise load regulation. These features, in combination, make the LT6654 ideal for portable equipment, industrial sensing and control, and automotive applications.
The LTC3631 is a high voltage, high efficiency step-down DC/DC converter with internal high side and synchronous power switches that draws only 12μA typical DC supply current at no load while maintaining output voltage regulation.
The LTC4227 provides ideal diode or hot swap functionality for both power tracks by controlling an external nchannelmosfet. As an ideal diode, the MOSFETs replace two high-power Schottky diodes and associated heat sinks, saving power and board area. A hot-swap control MOSFET allows a plate to be securely inserted and operated from the active backplane by limiting the influx current. The power output also protects against short-circuit failures with fast-acting current limiting and internal timing circuit breakers
