TE Connectivity AMP Connectors Producten

CRGS2512J18R

TE Connectivity AMP Connectors

RES SMD 18 OHM 5% 1.5W 2512

• Resistance: 18 Ohms
• Tolerance: ±5%
• Power (Watts): 1.5W
• Composition: Thick Film
• Features: Pulse Withstanding
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature: -55°C ~ 155°C
• Package / Case: 2512 (6432 Metric)
• Supplier Device Package: 2512
• Size / Dimension: 0.250" L x 0.126" W (6.35mm x 3.20mm)
• Height - Seated (Max): 0.026" (0.65mm)
• Number of Terminations: 2
• Failure Rate: -

package: 2512 (6432 Metric)

2-34129-1

TE Connectivity AMP Connectors

CONN SPADE TERM 14-16AWG #10

• Terminal Type: Standard
• Stud/Tab Size: 10 Stud
• Width - Outer Edges: 0.385" (9.78mm)
• Length - Overall: 0.685" (17.40mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 14-16 AWG
• Insulation: Non-Insulated
• Features: Brazed Seam, Serrated Termination
• Color: -

package: -

1544291-1

TE Connectivity AMP Connectors

CONN QC RCPT 15-20AWG 0.187

• Terminal Type: Standard
• Gender: Female
• Tab Width: 0.187" (4.75mm)
• Tab Thickness: 0.032" (0.81mm)
• Tab Length: 0.315" (8.00mm)
• Length - Overall: 0.709" (18.00mm)
• Termination: Crimp
• Wire Gauge: 15-20 AWG
• Insulation: Non-Insulated
• Mounting Type: Free Hanging (In-Line)
• Features: -
• Color: -

package: -

1-796681-4

TE Connectivity AMP Connectors

TERM BLOCK RCPT 14POS VERT 5MM

• Number of Levels: 1
• Positions Per Level: 14
• Pitch: 0.197" (5.00mm)
• Mating Orientation: Horizontal with Board
• Current: 17.5A
• Voltage: 300V
• Wire Gauge: 12-30 AWG
• Mounting Type: Through Hole
• Wire Termination: Screw - Rising Cage Clamp
• Features: Interlocking (Side)
• Color: Blue

package: -

JC6-T307-05

TE Connectivity AMP Connectors

CONN BARRIER STRIP 5CIRC 0.375"

• Terminal Block Type: Barrier Block
• Number of Circuits: 5
• Number of Circuits: 5
• Number of Wire Entries: 5
• Pitch: 0.375" (9.53mm)
• Number of Rows: 1
• Current Rating: 20A
• Voltage Rating: 300V
• Wire Gauge: 12-22 AWG
• Top Termination: Screws
• Bottom Termination: Solder Turret, Insulated
• Barrier Type: 2 Wall (Dual)
• Features: Flange
• Color: Black

package: -

1-796922-8

TE Connectivity AMP Connectors

CONN BARRIER STRIP 3CIRC 0.375"

• Terminal Block Type: Barrier Block
• Number of Circuits: 3
• Number of Circuits: 3
• Number of Wire Entries: 3
• Pitch: 0.375" (9.53mm)
• Number of Rows: 1
• Current Rating: 20A
• Voltage Rating: 300V
• Wire Gauge: 12-22 AWG
• Top Termination: Screws with Captive Plate
• Bottom Termination: PC Pin
• Barrier Type: 2 Wall (Dual)
• Features: Positions Stamped
• Color: Black

package: -

510-AG90D-10

TE Connectivity AMP Connectors

CONN SOCKET SIP 10POS GOLD

• Type: SIP
• Number of Positions or Pins (Grid): 10 (1 x 10)
• Pitch - Mating: 0.100" (2.54mm)
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: -
• Contact Material - Mating: Beryllium Copper
• Mounting Type: Through Hole
• Features: -
• Termination: Solder
• Pitch - Post: 0.100" (2.54mm)
• Contact Finish - Post: Gold
• Contact Finish Thickness - Post: -
• Contact Material - Post: Beryllium Copper
• Housing Material: Thermoplastic
• Operating Temperature: -

package: -

967505-3

TE Connectivity AMP Connectors

CONN PLUG 32POS R/A TIN 5MM

• Connector Type: Plug
• Contact Type: Tab
• Pitch - Mating: 0.197" (5.00mm)
• Style: -
• Shrouding: -
• Number of Positions: 32
• Number of Positions Loaded: All
• Number of Rows: 3
• Row Spacing - Mating: 0.217" (5.51mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: -
• Contact Length - Mating: -
• Contact Length - Post: -
• Overall Contact Length: -
• Insulation Height: -
• Contact Shape: -
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: -
• Contact Finish - Post: -
• Contact Material: -
• Insulation Material: -
• Features: -
• Operating Temperature: -
• Ingress Protection: -
• Material Flammability Rating: -
• Insulation Color: Black

package: -

1969688-3

TE Connectivity AMP Connectors

PTL PCB HEADER ASSM STDTEMP VERT

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.236" (6.00mm)
• Style: Board to Cable/Wire
• Shrouding: Shrouded - 4 Wall
• Number of Positions: 3
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Latch Holder
• Contact Length - Mating: -
• Contact Length - Post: 0.131" (3.33mm)
• Overall Contact Length: -
• Insulation Height: 0.681" (17.30mm)
• Contact Shape: Rectangular
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: -
• Contact Finish - Post: Tin
• Contact Material: Copper Alloy
• Insulation Material: Polybutylene Terephthalate (PBT), Glass Filled
• Features: Board Guide, Glow Wire Compliant
• Operating Temperature: -55°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Natural

package: -

644180-6

TE Connectivity AMP Connectors

CONN HEADER 13POS VERT .100 TIN

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Cable/Wire
• Shrouding: Shrouded - 1 Wall
• Number of Positions: 13
• Number of Positions Loaded: 9
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Friction Lock
• Contact Length - Mating: 0.295" (7.49mm)
• Contact Length - Post: 0.140" (3.56mm)
• Overall Contact Length: 0.535" (13.59mm)
• Insulation Height: 0.305" (7.75mm)
• Contact Shape: Square
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: -
• Contact Finish - Post: Tin
• Contact Material: Copper Alloy
• Insulation Material: Thermoplastic
• Features: -
• Operating Temperature: -55°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Natural

package: -

1-644874-4

TE Connectivity AMP Connectors

CONN HEADER 14POS VERT .100 TIN

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Style: Board to Cable/Wire
• Shrouding: Shrouded - 1 Wall
• Number of Positions: 14
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole
• Termination: Kinked Pin, Solder
• Fastening Type: Friction Lock
• Contact Length - Mating: 0.295" (7.49mm)
• Contact Length - Post: 0.125" (3.18mm)
• Overall Contact Length: 0.520" (13.21mm)
• Insulation Height: 0.310" (7.87mm)
• Contact Shape: Square
• Contact Finish - Mating: Tin
• Contact Finish Thickness - Mating: -
• Contact Finish - Post: Tin
• Contact Material: Copper Alloy
• Insulation Material: Thermoplastic
• Features: -
• Operating Temperature: -55°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Natural

package: -

9-146277-0-01

TE Connectivity AMP Connectors

CONN HDR BRKWAY .100 01POS VERT

• Connector Type: Header, Breakaway
• Contact Type: Male Pin
• Pitch - Mating: -
• Style: Board to Board or Cable
• Shrouding: Unshrouded
• Number of Positions: 1
• Number of Positions Loaded: All
• Number of Rows: 1
• Row Spacing - Mating: -
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Length - Mating: 0.318" (8.08mm)
• Contact Length - Post: 0.125" (3.18mm)
• Overall Contact Length: 0.533" (13.55mm)
• Insulation Height: 0.090" (2.29mm)
• Contact Shape: Square
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 30µin (0.76µm)
• Contact Finish - Post: Tin
• Contact Material: Copper Alloy
• Insulation Material: Liquid Crystal Polymer (LCP)
• Features: -
• Operating Temperature: -65°C ~ 105°C
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black

package: -

5-643815-3

TE Connectivity AMP Connectors

23P MTA100 CONN ASSY POL RIB

• Connector Type: Receptacle
• Contact Type: Female Socket
• Number of Positions: 23
• Pitch: 0.100" (2.54mm)
• Number of Rows: 1
• Row Spacing: -
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Locking Ramp
• Cable Termination: IDC
• Wire Type: Discrete or Ribbon Cable
• Wire Gauge: 26 AWG
• Features: Closed End
• Contact Finish: Tin
• Contact Finish Thickness: 80µin (2.03µm)
• Color: Blue

package: -

8-146493-0

TE Connectivity AMP Connectors

CONN HEADR 60POS .100" DUAL ROW

• Number of Positions: 60
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Length - Overall: 0.930" (23.62mm)
• Length - Post (Mating): 0.120" (3.05mm)
• Length - Stack Height: 0.700" (17.78mm)
• Length - Tail: 0.110" (2.79mm)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish - Post (Mating): Tin
• Contact Finish Thickness - Post (Mating): 100µin (2.54µm)
• Color: Black

package: -

1-146499-2

TE Connectivity AMP Connectors

24 MODII HDR DRST UNSHRD STKG

• Number of Positions: 24
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Length - Overall: 1.130" (28.70mm)
• Length - Post (Mating): 0.120" (3.05mm)
• Length - Stack Height: 0.900" (22.86mm)
• Length - Tail: 0.110" (2.79mm)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish - Post (Mating): Tin-Lead
• Contact Finish Thickness - Post (Mating): 100µin (2.54µm)
• Color: Black

package: -

1-2111244-0

TE Connectivity AMP Connectors

COLOR CAP W/DC,UTP,VIO

• Accessory Type: Cap
• For Use With/Related Products: Amp-Twist Jacks
• Features: Dust Cap
• Color: Violet

package: -

1-1102348-3

TE Connectivity AMP Connectors

CONN HOOD SIDE ENTRY SZ10 PG29

• Connector Type: Hood
• Style: Side Entry
• Size: 10
• Lock Location: Locking Clip (1) on Base Bottom
• Thread Size: PG29
• Size / Dimension: 3.740" L x 3.248" W x 3.110" H (95.00mm x 82.50mm x 79.00mm)
• Housing Color: Gray
• Features: -
• Ingress Protection: IP65 - Dust Tight, Water Resistant
• Housing Material: Aluminum, Die Cast
• Housing Finish: Powder Coated
• Operating Temperature: -

package: -

6-174213-2

TE Connectivity AMP Connectors

CONN D-TYPE PLUG 40POS R/A SLDR

• Connector Style: D-Type, Board to Board
• Connector Type: Plug, Female Sockets
• Number of Positions: 40
• Number of Rows: 2
• Shell Size, Connector Layout: 0.050 Pitch x 0.100 Row to Row
• Contact Type: Signal
• Mounting Type: Through Hole, Right Angle
• Flange Feature: -
• Termination: Solder
• Features: -
• Shell Material, Finish: -
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0

package: -

5205733-7

TE Connectivity AMP Connectors

CONN D-SUB PLUG 9POS VERT SOLDER

• Connector Style: D-Sub
• Connector Type: Plug, Male Pins
• Number of Positions: 9
• Number of Rows: 2
• Shell Size, Connector Layout: 1 (DE, E)
• Contact Type: Signal
• Mounting Type: Through Hole
• Flange Feature: Housing/Shell (Unthreaded)
• Termination: Solder
• Features: -
• Shell Material, Finish: Steel, Yellow Chromate Plated Zinc
• Contact Finish: Gold
• Contact Finish Thickness: Flash
• Ingress Protection: -
• Material Flammability Rating: UL94 V-0

package: -

5787775-1

TE Connectivity AMP Connectors

CONN CHAMP PLUG 68POS .8MM IDC

• Connector Style: Center Strip Contacts
• Connector Type: Stacked, 2 Plugs
• Number of Positions: 68, 68
• Number of Rows: 2
• Mounting Type: Free Hanging (In-Line)
• Termination: IDC
• Flange Feature: -
• Type: -
• Features: Assembly Kit, Shielded
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)

package: -

1-1478013-0

TE Connectivity AMP Connectors

CONN ADAPT TNC PLUG TO BNC JACK

• Adapter Type: Plug to Jack
• Conversion Type: Between Series
• Adapter Series: BNC to TNC
• Center Gender: Female to Male
• Convert From (Adapter End): TNC Plug, Male Pin
• Convert To (Adapter End): BNC Jack, Female Socket
• Impedance: 50 Ohm
• Style: Straight
• Mounting Type: Free Hanging (In-Line)
• Mounting Feature: -
• Fastening Type: Bayonet Lock, Threaded
• Frequency - Max: -
• Ingress Protection: -
• Center Contact Plating: Gold
• Features: -

package: -

4-1734124-2

TE Connectivity AMP Connectors

CONN RCPT MINI DIN 6P W/O PANEL

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 6
• Shell Size - Insert: Mini DIN
• Shell Size, MIL: -
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Orientation: Keyed
• Ingress Protection: -
• Shell Material, Finish: Thermoplastic, Glass Filled
• Contact Finish: Gold
• Features: Board Lock, Shielded
• Voltage - Rated: 30VDC
• Current Rating: 1A

package: -

5-1612163-3

TE Connectivity AMP Connectors

CONN PCI EXP FEMALE 98POS 0.039

• Card Type: PCI Express?
• Gender: Female
• Number of Positions/Bay/Row: -
• Number of Positions: 98
• Card Thickness: 0.062" (1.57mm)
• Number of Rows: 2
• Pitch: 0.039" (1.00mm)
• Features: Board Guide, Locking Ramp
• Mounting Type: Through Hole
• Termination: Solder, Staggered
• Contact Material: Copper Alloy
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Contact Type: -
• Color: Black
• Flange Feature: -
• Operating Temperature: -40°C ~ 85°C

package: -

6469602-1

TE Connectivity AMP Connectors

3.43 MM CONTACT TAIL LENGTH DUAC

• Connector Usage: -
• Connector Type: Header, Male Pins
• Connector Style: -
• Number of Positions: 29
• Number of Positions Loaded: All
• Pitch: -
• Number of Rows: -
• Number of Columns: -
• Mounting Type: Panel Mount, Through Hole, Right Angle
• Termination: Solder
• Contact Layout, Typical: 20 Signal, 9 Power
• Features: -
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Black

package: -

1410138-2

TE Connectivity AMP Connectors

CONN R/A PLUG DC VITA41

• Connector Usage: Daughtercard
• Connector Type: Plug, Male Blades
• Connector Style: VITA 41, Left End
• Number of Positions: 192
• Number of Positions Loaded: All
• Pitch: 0.071" (1.80mm)
• Number of Rows: 12
• Number of Columns: 16
• Mounting Type: Board Edge, Through Hole, Right Angle
• Termination: Solder
• Contact Layout, Typical: 48 Signal Pairs, 96 Ground
• Features: Board Guide
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Black

package: -

1934956-1

TE Connectivity AMP Connectors

CONN ASSY HDR TINMAN

• Connector Usage: -
• Connector Type: Header, Male Pins
• Connector Style: High Density (HDC, HDI, HPC)
• Number of Positions: 120
• Number of Positions Loaded: All
• Pitch: 0.055" (1.40mm)
• Number of Rows: 15
• Number of Columns: 8
• Mounting Type: Through Hole
• Termination: Press-Fit
• Contact Layout, Typical: -
• Features: -
• Contact Finish: -
• Contact Finish Thickness: -
• Color: Black

package: -

1345051-1

TE Connectivity AMP Connectors

Z-PACK/A RAMH.110P.

• Connector Type: Plug, Male Pins
• Connector Style: A 22
• Number of Positions: 110
• Number of Positions Loaded: All
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Mounting Type: Board Edge, Through Hole, Right Angle
• Termination: Press-Fit
• Connector Usage: Backplane
• Contact Finish: -
• Contact Finish Thickness: -

package: -

5-1393644-6

TE Connectivity AMP Connectors

EUROCARD TYPE B

• Connector Type: Plug, Male Pins
• Number of Positions: 20
• Number of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Style: 1/3 B
• Level, Class: 2
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Features: -
• Contact Finish: Gold or Gold-Palladium
• Contact Finish Thickness: -

package: -